Instruction for you about the Control System

 

How To Support you

Will support you for ever, check Support method(Email us or Skype) from: HERE

Frequently Asked Question(Read Firstly):

  1. Lock Force is not enough and need get MAXIMUM Force , reason is: Armature Plate installed too tight;  recommend loosen the Armature Plate screws a little so that the plate can swing a little, check from chapter 2 of this link: https://beseencontrol.com/hpatrol/Maglock-FAQ-Guide.pdf
  2. Use what wire for the connection? Normally use cat-6e 24awg cable is ok for this system wire.
  3. We have step by step video and diagram for each component wire. Some customer don't want to watch video, can check below Chapter 2 for manual.
  4. We bring value to a lot projects during the past 20 years, also save a lot cost for many customers. If any problem, please don't return directly, that will bring big loss to me. I do support with my heart, Contact me for solution.

1.Quick Video(Wire & Program):

https://vimeo.com/711935656/83c1cd1ca2


2.Manual & Diagram Link:

Some customer don't want to watch video, Can directly：

check manual from HERE 

and diagram from HERE


3.Other Video guide and Wire Diagram:

3.1. Enroll card/Fob Video guide: HERE

3.2 PIN code enroll video guide: HERE

3.3 Bell Wire Diagram, check from HERE.

3.4 Check the Manual if you don't want to watch video, Enroll/Delete user Manual guide from: HERE

    

4.FAQ Problem and Answer:

 check details link: HERE


5.Lock Install:

1). Check the Magnetic lock install video and How to Get Maximum Force from Here.