Instruction for you about Video Bell Control System

How To Support you

Will support you for ever, check Support method from:

https://beseencontrol.com/Contact.html

Frequently Asked Question(Read Firstly):

1. If you use magnetic lock and Force is not enough and need get MAXIMUM Force , reason is: Armature Plate installed too tight;  recommend loosen the Armature Plate screws a little so that the plate can swing a little, check from chapter 2 of this link: https://beseencontrol.com/maglock.html
2. Use what wire for the connection? Normally use cat-6e 24awg cable is ok for this system wire.
3. We have step by step video and diagram for each component wire.
4. We bring value to a lot projects during the past 20 years, also save a lot cost for many customers. If any problem, please don't return directly, that will bring big loss to me. I do support with my heart, Contact me for solution.

Quick Demo Video for you:

https://vimeo.com/960162841/e972a853b4

Part 1: Connection/Wire Big Picture & Video

For all components connection wire big picture, check from below link:

https://beseencontrol.com/videopad-V1.jpg

For how to wire the system, please check below video:

https://vimeo.com/806281024/4bae0fb319

Part 2: Keypad Controller Materials Link:

For how to enroll PIN Code/Password user,please check below video:

https://vimeo.com/917020352/c5a83e28fe

For all detail program, please check below Manual:

Part 3: Lock Install:

1. Check the Magnetic lock install and How to Get Maximum Force from:

https://beseencontrol.com/maglock.html

https://vimeo.com/924925386/e43cd220a7

2. Check the Strike Lock Install Video and DEMO from from HERE

I will support you for ever with my nearly 20 years experience.

1. If you prefer email, I will do email support.

2. If you want phone support, I can call you( Please tell me your phone number)

3. Also can do teamviewer support to remotely connect to your computer to guide you, to provide live training and support for you.