Instruction for you about the Control System

How To Support you

Will support you for ever, check Support method from: HERE

Frequently Asked Question(Read Firstly):

1. If you use magnetic lock and Force is not enough and need get MAXIMUM Force , reason is: Armature Plate installed too tight;  recommend loosen the Armature Plate screws a little so that the plate can swing a little, check from chapter 2 of this link: https://beseencontrol.com/hpatrol/Maglock-FAQ-Guide.pdf
2. Use what wire for the connection? Normally use cat-6e 24awg cable is ok for this system wire.
3. We have step by step video and diagram for each component wire.
4. We bring value to a lot projects during the past 20 years, also save a lot cost for many customers. If any problem, please don't return directly, that will bring big loss to me. I do support with my heart, Contact me for solution.

Part 1: Keypad Controller Materials Link:

1. For how to wire and program the system, please check below video:

https://beseencontrol.com/controlpad.html

Part 2: Video Intercom Materials Link:

1. For how to wire the system, please check below video:

https://www.youtube.com/watch?v=nxTXr6rT-M4&feature=youtu.be

Part 3: Lock Install:

1. Check the Magnetic lock install video and FAQ from Here.

2. Check the Strike Lock Install Video and DEMO from from HERE

I will support you for ever with my nearly 20 years experience.

1. If you prefer email, I will do email support.

2. If you want phone support, I can call you( Please tell me your phone number)

3. Also can do teamviewer support to remotely connect to your computer to guide you, to provide live training and support for you.