Instruction for you about the Lock Control System
Notes:
- I'd suggest setting up the device on a table and make sure basic functions before installation.
Frequently Asked Question(Read Firstly):
- Lock Force is not enough and need get MAXIMUM Force , reason is: Armature Plate installed too tight; recommend loosen the Armature Plate screws a little so that the plate can swing a little, check from chapter 2 of this link: https://beseencontrol.com/hpatrol/Maglock-FAQ-Guide.pdf
- Use what wire for the connection? Normally use cat-6e 24awg cable is ok for this system wire.
- We have step by step video and diagram for each component wire.
- We bring value to a lot projects during the past 20 years, also save a lot cost for many customers. If any problem, please don't return directly, that will bring big loss to me. I do support with my heart, Contact me for solution.
How To Support you
Will support you for ever, check Support method(Email us or Skype) from: HERE
Video and Materials Link:
1. For the wire diagram, check from HERE.
2. For how to wire the Lock, Exit Button, please check below wire Video:
https://vimeo.com/714666609/97da8b5c0a
Lock Install:
1. For how to adjust lock force or make it engaged, follow this video: https://youtu.be/W-e1OKiL4Bg
2. Check the Magnetic lock install video and How to Get Maximum Force from Here.
Frequent Asked Qustion:
For example, Lock force is not good, answers from Here
I will support you for ever with my nearly 20 years experience.
1. If you prefer email, I will do email support.
2. If you want phone support, I can call you( Please tell me your phone number)
3. Also can do teamviewer support to remotely connect to your computer to guide you, to provide live training and support for you.
