Instruction for you about the Control System

 

How To Support you

Will support you for ever, check Support method(Email us or Skype) from: 

https://beseencontrol.com/Contact.html

Frequently Asked Question(Read Firstly):

1. Lock Force is not enough and need get MAXIMUM Force , reason is: Armature Plate installed too tight;  recommend loosen the Armature Plate screws a little so that the plate can swing a little, check from chapter 2 of this link: https://beseencontrol.com/maglock.html
2. Use what wire for the connection? Normally use cat-6e 24awg cable is ok for this system wire.
3. We have step by step video and diagram for each component wire. Some customer don't want to watch video, can check below Chapter 2 for manual.
4. We bring value to a lot projects during the past 20 years, also save a lot cost for many customers. If any problem, please don't return directly, that will bring big loss to me. I do support with my heart, Contact me for solution.

1. Video and Materials Link( For Magnetic Lock ):

1.1. For how to wire the system(if with Magnetic Lock), please check below video:

 https://vimeo.com/711935656/83c1cd1ca2

1.2. Wire Diagram of Magnetic Lock, Please check:

2. Video and Materials Link( For Strike Lock ):

2.1. For how to wire the system(if with Strike Lock), please check below video:

https://vimeo.com/960983162/a0ab48b301

2.2. Wire Diagram of Strike Lock,  Please check:

3.Manual & Program video Link:

check manual from:

https://beseencontrol.com/sby/Enroll-DeleteUser.pdf

4.Other Video guide and Wire Diagram

4.1 Door Bell Wire Diagram:

5.FAQ Problem and Answer:

 check details link: 

https://beseencontrol.com/FAQMetalDevice.pdf

5.Lock Install:

5.1 Check the Magnetic lock install guide and How to Get Maximum Force from:

https://beseencontrol.com/maglock.html

https://vimeo.com/924925386/e43cd220a7

5.2 Check the Strike Lock Install and DEMO from:

https://beseencontrol.com/strikelock.html