Here is : Home --> Products -->Access Control System
BSTV-503 Access Control Video Server

Proximity Card Access Control

Technical Specification

Using TCP/IP communication, this device can connect with any type of monitor and cameras(with BNC interface).Through the access control management software, it can realize real-time video monitoring and can generate real-time photos and video files which will be stored in the computer. Afterwards user can check those records the videoserver and camera captured.

One video server can connect with one camera. The photos and video files captuered are high quality and clear. The access control management software can support multi-pieces of video server operate at the same time.

Performance parameters

Operation Voltage: 12V DC
Operation Current: <300 mA
Size: 147mm×106mm×42mm
Weight: 380g

（Without p ower supply. User need to purchase the power supply by themselves or if power of the access control permit, user can get power supply from the access control ）

Input Signal: One-way
Output Mode:TCP/IP

（ support 10M or 10M/100M adaptive network interface)

 


Model No. WG503
Product Name Access Control Video Server
Basic Info
   
Unit Size 147mm×106mm×42mm
Weight 380g
Unit Packing Way BOX
Accessories User Manual, warranty card
FEATURES
General introduction Using TCP/IP communication, this device can connect with any type of monitor and surveillance cameras(with BNC interface).Through the access control management software, it can realize real-time video monitoring and can generate real-time photos and video when wiping cards, and these photos and video files will be stored in the computer. Then user can check those records later.
Connection One video server can connect with one surveillance camera. The photos and video files captured are vary clear with high quality. The access control management software can support multiple video server operating at the same time.
Note The device does not contain the power, the power required from the purchaser, to taken from the access control power supply under the premise available.
To be used with V6.8 or above version.
Second Generation As the second generation of video access control items, WG503 access control video serve can connect surveillance cameras also with TCP/IP communications.
Advantages and improvements: More clear images to meet the deeds of professional users Customers ca choose their own variety of required cameras.( e.g. light filling, wide-angle. E With head, automatic focusing on, etc.) It designs more pretty,, decent and professional. The second-generation items need V6.8 or above version to use, not compatible with the first-generation items for the great change.
PARAMETERS
battery depletion protection Protection for battery depletion, If the rechargeable battery exhausted, the battery will damage and obsolescence,If without the protection for exhaust ,will result in a critical state, invalid for read card ,power locked,user will locked up until the power supply runs out or reset.
charge With Charge and discharge function, can circumscribed battery with 7AH 12VDC to support 3-5 hours work with 1pc electronic lock ,1 pc card reader,1 pc controller .
PARAMETERS
Operating Voltage 12V DC
Operating Current <300 mA
Input Signal Single-way
Output Mode TCP/IP
Adaptive network interface support for 10M or 10M/100M adaptive network interface