Instruction for you about the weatherProof Metal Control System

1.How To Support you

Will support you for ever, check Support method(Email us or Skype) from: HERE 

Frequently Asked Question(Read Firstly):

1. Lock Force is not enough and need get MAXIMUM Force , reason is: Armature Plate installed too tight;  recommend loosen the Armature Plate screws a little so that the plate can swing a little, check from chapter 2 of this link: https://beseencontrol.com/hpatrol/Maglock-FAQ-Guide.pdf
2. Use what wire for the connection? Normally use cat-6e 24awg cable is ok for this system wire.
3. We have step by step video and diagram for each component wire.
4. We bring value to a lot projects during the past 20 years, also save a lot cost for many customers. If any problem, please don't return directly, that will bring big loss to me. I do support with my heart, Contact me for solution.

2.Manual and Video Guide

1. Firstly Please change wire plug place, follow this video: https://youtu.be/RodL78fqr7s

2. For the Wire video guide, Please Click HERE.
3. For how to quickly enroll card/Key Fob, check video from HERE.
4. For how to enroll PIN code, check video from HERE.
5. For the card/PIN Code Program Manual guide ,please check from: HERE. 
6. For the Door Bell Wire guide ,please check diagram from here.

4.Magnetic Lock Install Guide

Check the Magnetic lock install video and How to Get Maximum Force from Here.

The lock is water proof, can install outside, demo video is here.

How to Get support

Please send email to: be.seen@hotmail.com, We support for ever with our rich experience.