Instruction for you about the Fingerprint

My Help To You

If you have any problem, please contact me freely, I am responsible seller. You can ask support from me by below ways:

1. Send email to me, This is the highly recommended way. My mail box is: xychen1996@gmail.com

Most problem or questions can be addressed by below information, Please check carefully. For the frequently questions, Please go to FAQ.

• Fingerprint time checking is a system, includes software and hardware, it need some time for you to understand it.
• If you have problem, please be patient, you can ask us for help, our experience will help you.
• Don't spend too much time on it, if you stucked at something, Please send email to us.

Initial Procedure for you to start

• Firstly, forget the software, just press menu and do some operations.
• Enroll(register finger),quit from menu, then punch your finger, the device should recognize it.
• Follow the Quick Software Guide to have some operations on the software.
• If have other advanced requirements for time checking, check the full software manual.

Download Software (Support WinXP/2000/Vista/Win7 32bit/win7 64 bit .etc.)

1. Never install the software in your computer before? download the latest full software from: HERE.

Download HardwareManuals

1. Hardware manual from: HERE.

2. Important, the best method to punch finger:

1) Better to use the Thumb finger, it's easier for recognition
2) Touch the forehead to increase oily level of the finger.
3) punch a little harder strength
4) punch a little long time
5) Make you finger dry and clean

Download Software Manuals

1. You can download Quick software Manual from HERE.

2. You can download Full software Guide from HERE.

FAQ

1. When register finger, why "Enroll failed! Enroll again" . Answer: When you enroll, Please punch the same finger for 3 times, not use three different fingers
2. What's the software account and password? the account is: system and there is no password