Instruction for you about the Fingerprint
My Help To You
If you have any problem, please contact me freely, I am responsible seller. You can ask support from me by below ways:
- Send email to me, This is the highly recommended way. My mail box is: xychen1996@gmail.com
Most problem or questions can be addressed by below information, Please check carefully. For the frequently questions, Please go to FAQ.
- Fingerprint time checking is a system, includes software and hardware, it need some time for you to understand it.
- If you have problem, please be patient, you can ask us for help, our experience will help you.
- Don't spend too much time on it, if you stucked at something, Please send email to us.
Initial Procedure for you to start
- Firstly, forget the software, just press menu and do some operations.
- Enroll(register finger),quit from menu, then punch your finger, the device should recognize it.
- Follow the Quick Software Guide to have some operations on the software.
- If have other advanced requirements for time checking, check the full software manual.
Software Manual
- For software quick guide, download from: HERE
- For the software manual, Please download from HERE
Hardware Manual
- For the hardware manual, Please download from HERE.
- Important, the best method to punch finger:
1) Better to use the Thumb finger, it's easier for recognition
2) Touch the forehead to increase oily level of the finger.
3) punch a little harder strength
4) punch a little long time
5) Make you finger dry and clean
Download Software
For English and Spanish version, You can download software from HERE.
For French version, You can download software from HERE.
FAQ
- How to turn on device? Answer: press the bottom left key on the key area for 3-5 seconds.
- When register finger, why "Enroll failed! Enroll again" . Answer: When you enroll, Please punch the same finger for 3 times, not use three different fingers
- What's the software account and password? the account is: system and there is no password
- When I punch finger, the screen display "Please press in/out Key" , why? Answer: select direction(in or out ) firstly, please press up/down key to select direction