Instruction for you about the Fingerprint

My Help To You

If you have any problem, please contact me freely, I am responsible seller. You can ask support from me by below ways:

1. Send email to me, This is the highly recommended way. My mail box is: xychen1996@gmail.com

   Most problem or questions can be addressed by below information, Please check carefully. For the frequently questions, Please go to FAQ.

   • Fingerprint time checking is a system, includes software and hardware, it need some time for you to understand it.
   • If you have problem, please be patient, you can ask us for help, our experience will help you.
   • Don't spend too much time on it, if you stucked at something, Please send email to us.

Initial Procedure for you to start

• Firstly, forget the software, just press menu and do some operations.
• Enroll(register finger),quit from menu, then punch your finger, the device should recognize it.
• Follow the Quick Software Guide to have some operations on the software.
• If have other advanced requirements for time checking, check the full software manual.

Software Manual

1. For software quick guide, download from: HERE
2. For the FULL software manual, Please download from HERE

Hardware Manual

1. For the hardware manual, Please download from HERE.
2. Important, the best method to punch finger:
   
   1) Better to use the Thumb finger, it's easier for recognition
   2) Touch the forehead to increase oily level of the finger.
   3) punch a little harder strength
   4) punch a little long time
   5) Make you finger dry and clean

Download Software

You can download software from HERE.

FAQ

1. When register finger, why "Enroll failed! Enroll again" . Answer: When you enroll, Please punch the same finger for 3 times, not use three different fingers
2. What's the software account and password? the account is: system and there is no password
3. How to select in/out? press up/down key to select