GT06 RFID Guard TourReader is designed for the harshest environments. The metal body and molded rubber shell,which protect the electronics against damage and secure the collected data, arethe key points to GT06 RFID Guard Tour Reader's extreme durability. Withspecial waterproof pad and adhesive, the reader is so waterproof that it evencan work under water. Furthermore, over 40,000 reads are able to be storedbefore the next download of data.
IT works with the popular RFID tag. With a simple non-contactswipe, you can access information from tag, and then download patrol data toour intellectualized management software with a USB port cable. The informationreports can demonstrate the guards patrolling activities.
Stainless steel body, molded rubber handle, super durability
|RFID Guard Tour Reader BeSeen-GT06|
|Physical||Stainlesssteel body, molded rubber handle, super durability|
|Humidity||5%to 95% non-condensing|
|Battery||3.7V rechargeable lithium battery, 800mAh|
|SignalCard Detection||Autoinduction card-reading|
RFID Checkpoint Tag Features
RFID tags are constructed to withstand intentional sabotages,which can be read from long distances and operated in wide temperature ranges.They are also completely waterproof, and can be sealed inside non-metallicmaterial walls; Button, circle, keyring, nail and cylinder-shaped cards used asguard tour checkpoints. These can be installed either on or beneath wallsurfaces; Key chain-attachable type personnel / incident card used to identifypatrol personnel or events and incidents. Its working frequency is 125KHz.
USB communication cable
The usb cable can be used to connect between the reader and PC, which is according with DY/T1019, IEC61156, ANSI/EIA/TIA-568 standard.
Hardware quick start guide
1. The patrolling guard takes the reader and read his own Guard ID to identify himself with the system
2. Then the guards go to the checkpoints, the Reader will automatically read each RFID tag and no need touch it. When reading successfully, a flash of the red indicator light accompanied by a ‘Beep’ means that a reading has been made. The reader will store the signal card’s ID number and time for every station reading.
3. After patrolling are done, use the USB port cable to connect the computer and the Reader directly and have a data analysis and management.